CFD-FDS-FEA-World wide Simulation Projects

Mechanical and ventilation simulation and analysis center

Heat transfer simulation and analysis

Transfer of heat from high temperature source to low temperature source is called heat transfer. The heat transfer can also take place within the system due to temperature difference at various points inside the system. The difference in temperature is considered to be ‘potential’ that causes the flow of heat and the heat itself is called as flux.

Heat transfer methods

In heat transfer fundamental, there are three modes of heat transfer between two objects: conduction, convection and radiation.

These methods have been described below:

Conduction: The transfer of heat between two solid bodies is called as conduction. It depends on the difference in temperature of the hot and cold body.

Convection: The transfer of heat between a solid surface and the liquid is called as convection heat transfer. Convection can also take place between two types of fluids like gas and liquid and also inside a fluid.

Radiation: When two bodies are at different temperatures and separated by distance, the heat transfer between them is called as radiation heat transfer. In case of the conduction and convection heat transfer there is a media to transfer the heat, but in case of the radiation heat transfer there is no media. The radiation heat transfer occurs due to the electromagnetic waves that exist in the atmosphere.

You can see all types of heat transfer modes in following picture.

heat transfer mode

Heat transfer analysis is one type of the CFD simulations. This type of CFD simulation is focused on calculating the rate of heat transfer inside and outside of a system.

Heat transfer simulations is a powerful tool to estimate the thermodynamic condition inside an industrial process and system. This type of CFD simulation can be used for:

PCB heat transfer simulation and analysis

Heat exchanger simulation and analysis

Reactor simulation and analysis

Electric board simulation

Engine heat transfer simulation

And …

heat transfer simulation


ARA Co

Heat transfer simulation

Heat exchanger simulation

Convection heat transfer simulation

Website: http://araco.ir/en

Email: Info@araco.ir 

Cell phone: 00989124780268 (Whats app - Telegram - IMO)

Office: 00982166561974 - 00982166129745



نوشته شده توسط محمد قربانعلی بیک
ساخت وبلاگ در بلاگ بیان، رسانه متخصصان و اهل قلم

CFD-FDS-FEA-World wide Simulation Projects

Mechanical and ventilation simulation and analysis center

CFD-FDS-FEA-World wide Simulation Projects

CFD and FEM simulations and analysis
Thermal simulation and analysis
PyroSim and FDS (Fire) simulation
Contact us : Info@araco.ir
Official website : http://araco.ir/en
Cell phone : +98 912 4780268
Office : +98 21 66561974
Office : +98 21 66129745

بایگانی

Transfer of heat from high temperature source to low temperature source is called heat transfer. The heat transfer can also take place within the system due to temperature difference at various points inside the system. The difference in temperature is considered to be ‘potential’ that causes the flow of heat and the heat itself is called as flux.

Heat transfer methods

In heat transfer fundamental, there are three modes of heat transfer between two objects: conduction, convection and radiation.

These methods have been described below:

Conduction: The transfer of heat between two solid bodies is called as conduction. It depends on the difference in temperature of the hot and cold body.

Convection: The transfer of heat between a solid surface and the liquid is called as convection heat transfer. Convection can also take place between two types of fluids like gas and liquid and also inside a fluid.

Radiation: When two bodies are at different temperatures and separated by distance, the heat transfer between them is called as radiation heat transfer. In case of the conduction and convection heat transfer there is a media to transfer the heat, but in case of the radiation heat transfer there is no media. The radiation heat transfer occurs due to the electromagnetic waves that exist in the atmosphere.

You can see all types of heat transfer modes in following picture.

heat transfer mode

Heat transfer analysis is one type of the CFD simulations. This type of CFD simulation is focused on calculating the rate of heat transfer inside and outside of a system.

Heat transfer simulations is a powerful tool to estimate the thermodynamic condition inside an industrial process and system. This type of CFD simulation can be used for:

PCB heat transfer simulation and analysis

Heat exchanger simulation and analysis

Reactor simulation and analysis

Electric board simulation

Engine heat transfer simulation

And …

heat transfer simulation


ARA Co

Heat transfer simulation

Heat exchanger simulation

Convection heat transfer simulation

Website: http://araco.ir/en

Email: Info@araco.ir 

Cell phone: 00989124780268 (Whats app - Telegram - IMO)

Office: 00982166561974 - 00982166129745

نظرات  (۰)

هیچ نظری هنوز ثبت نشده است

ارسال نظر

ارسال نظر آزاد است، اما اگر قبلا در بیان ثبت نام کرده اید می توانید ابتدا وارد شوید.
شما میتوانید از این تگهای html استفاده کنید:
<b> یا <strong>، <em> یا <i>، <u>، <strike> یا <s>، <sup>، <sub>، <blockquote>، <code>، <pre>، <hr>، <br>، <p>، <a href="" title="">، <span style="">، <div align="">
تجدید کد امنیتی